Kwikclamp has added a new extruded alumnium kick plate product to the range replacing steel plate / flat bar. The proprietary design enables total compliance of the installed kick plate (also known as kerb rail) for both AS1657 and AS1428 installations. M10 x 25 bolts are slid into a recessed slot on the rear of the extrusion and are fixed onto both the Kwikclamp Handrail fitting KC-242 toe plate base flange or other combinations of fittings for inclined ramp applications. Complete with internal and external corners, all pre-welded for fast installation plus end caps and rivets to seal off the ends of the kick plate when required. Produces a very neat, good looking finished job. Being aluminium it is easily powder coated to any required colour. Made from 6106-T6 grade aluminium alloy, the neat smooth finish of the kick plate face is way more attractive than many other alternatives. It is light weight by very strong, easily complying with AS1657 deflection requirements, easy to move about the job and does not flex or flop like other steel products. DOWNLOAD Brochure