Bikeway Top Rail / Barrier panel Infill
Offset top rail and balustrade panel for level & inclined applications.
APPLICATIONS SUITED TO
- Shared pedestrian paths
- Cycle paths & bikeways
- Protection over culverts
- Foot bridges
Refer to applicable Australian Standards & Building Codes
KEY FEATURES
- Modular flexibility, simple & quick assembly
- No-weld assembly, flat pack delivery
- Wide range of configurations for site specific requirements
- Hot dip Galvanised for superior corrosion resistance
- Powder coated colour options
TYPICAL INSTALLATION
COMPLIANCE & TESTING
- Kwikclamp barrier panels & handrails are designed & manufactured to Austroads Guide to Road Design
- Tested & certified to AS1170.2 and AS5100
- Tested & certified to AS1567s
WARRANTY
- 5 years from date of purchase subject to correct installation, use & maintenance
- Standard design life for the barrier system is 75 years in C2 corrosion and C3 wind locations
SPECIFICATIONS
STANCHIONS & RAILS
- 40 NB medium (48.3 x 3.2mm)
- C250 & C350 grade
- 3.6kg per metre
- Hot dip galvanised, min 390gsm, complies with AS4680
CLAMP FITTINGS
- Spheroidal graphite cast iron, hot dip galvanised & electro-galv, min 500gsm to AS 4680
- Protective coating on screw threads316 grade stainless steel grub screws, 15mm
- 450 MPa tensile strength
- Tamper resistant grub screw plugs available
- Min 5 mm thickness
BALUSTRADE PANELS
- 2000mm wide x 1000mm high standard size
- 40 NB medium (48.3 x 3.2mm) top & bottom rails
- 12mm solid rod pickets @ 100mm centres, heavy duty 16mm rods are available to special order
- Hot dip galvanised after welding, min 500gsm HDG coating
- Approx 30kg weight per panel
FIXINGS
- M12 galvanized mechanical concrete anchor bolts
- M16 galvanised high tensile bolt set for structural steel installations
- 500mm inground concrete pad
Kwikclamp balustrades and hand rails are designed and manufactured in accordance with Austroads Guide to Road Design and other relevant statutory WHS Codes of Practice / Guidelines, galvanised to AS4792 & AS4680 as applicable, standard design life of barriers & fittings is 75 years in C2 corrosivity zones